Carbide Rotary Burr SC Shape -Cylinder Shape e nang le Radius End

Carbide Rotary Burr SC Shape -Cylinder Shape with Radius End Featured Image

Tlhaloso e Khutšoanyane:

Carbide rotary burr e boetse e bitsoa carbide high speed cutter, kapa carbide mold cutter, E sebelisoa haholo lefapheng la ts'ebetso ea tšepe, ts'ebetso ea Metal surface joalo-joalo.

Re romelle lengolo-tsoibila

Mehlala ea mahala

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Kopo

● Ho lokisa mefuta e sa tšoaneng ea lisebelisoa tsa tšepe tse kenyelletsang ≤ HRC65 tšepe e thata.
● Ho e-na le mabili a manyenyane a emery, a se nang tšilafalo ea phofo.
● Ho eketsa tlhahiso ka makhetlo a 'maloa ho feta ho sebelisa lisebelisoa tsa letsoho le makhetlo a mararo ho isa ho a mahlano ho feta ho sebelisa mabili a manyenyane a emery.
● Ho ba le bophelo bo bolelele ba makhetlo a leshome ho feta litšepe tse lebelo le holimo le makhetlo a mashome a mahlano ho feta mabili a manyane a emery.
● Qetella ho lokisa mefuta e sa tšoaneng ea likoti.
● Ho tlosa li-burrs tsa li-castings, forgings le spatter ea welding likopanong tsa weld.
● Chamfering angle, sefaha se chitja kapa lekolilo holim'a likaroloana tsa mochine.
● Ho phunya kapa ho phunya lipeipi.
● Ho bentša mocha oa impeller.
● Ho sila lesoba hore le be le sebōpeho se nepahetseng.

Mefuta ea li-Cutting Edge

Mefuta e meng ea ho khaola	Litšoantšo	Kopo
Single Cut M		Hlooho e le 'ngoe e sehang e le 'ngoe, sebopeho sa serrated se setle, 'me qetello ea bokaholimo e ntle, e loketse ho sebetsana le tšepe e thata ka thata HRC40-60 degrees, alloy e thibelang mocheso, alloy base ea nikel, alloy e thehiloeng ho Cobalt, tšepe e sa hloekang, joalo-joalo.
Habeli Cut X		Sebopeho sena sa ho itšeha habeli se na le chip e khuts'oane le sephetho se phahameng sa holimo, se loketse ho sebetsa tšepe e entsoeng ka tšepe, tšepe e entsoeng ka tšepe, tšepe e thata ho feta HRC60, alloy e thehiloeng ho Nikel, alloy e thehiloeng ho cobalt, tšepe e sa hloekang ea austenitic, alloy ea titanium, joalo-joalo.
Aluminium Cut W		Sebopeho sa ho itšeha sa Aluminium se na le pokotho e kholo ea chip, sehalo se bohale haholo le ho tlosa chip ka potlako, se loketse ho sebetsa aluminium, alloy alloy, tšepe e bobebe, tšepe e seng ferrous, polasetiki, rabara e thata, patsi joalo-joalo.

Lintlha Tse ka Sehloohong

Sebopeho le Mofuta	Odara No.	Boholo				Mofuta oa Leino
Sebopeho le Mofuta	Odara No.	Hlooho Dia (mm) d1	Bolelele ba Hlooho (mm) L2	Shank Dia (mm) d2	Kakaretso ea Bolelele (mm) L1	Mofuta oa Leino
Sebopeho sa Cylinder se nang le Radius End Type c	C0313X03-25	3	13	3	38	X
	C0413X03-38	4	13	3	51	X
	C0613X03-38	6	13	3	51	X
	C0616X06-45	6	16	6	61	X
	C0820X06-45	8	20	6	65	X
	C1020X06-45	10	20	6	65	X
	C1225X06-45	12	25	6	70	X
	C1425X06-45	14	25	6	70	X
	C1625X06-45	16	25	6	70	X

FAQs

P: Nka etsa odara ea tsela?
A: Ee, re amohela odara e nyane ea tlhahlobo.

P: Mokhoa oa hau oa ho tjheseletsa ke ofe?
Silver welding , Ena ke mokhoa o ka sehloohong oa ho cheselletsa lihlahisoa tsa boleng bo holimo.

Q: Ho thoe'ng ka nako ea pele?
A: Re na le litlhaloso tse tloaelehileng ka har'a setoko, thepa ea thepa matsatsi a 3.Bakeng sa lihlahisoa tsa sustomized, matsatsi a 25.

Q: Na fektheri ea hau e ka fana ka tlhahiso ea OEM?
A: E, haeba theko ea hau e lumellana le litlhoko, re ka u etsetsa sephutheloana ho latela litlhoko tsa hau.

P: Na u ka ba rekisetsa li-burrs tsa carbide ka mokhoa oa sutu?
A: E, re na le mabokose a phutha a polasetiki, foromo ea ho paka ea 5pcs/8pcs/10 e ea fumaneha

Q: Na u netefatsa boleng?
Ee, re na le lits'ebeletso tse netefalitsoeng tsa ho lata lihlahisoa tse rekisitsoeng.Haeba u na le lipotso, ka kopo ikutloe u lokolohile ho ikopanya le rona.U tla fumana tšebeletso e khotsofatsang ka mor'a thekiso nakong ea lihora tse 24.

E fetileng: Carbide Rotary Burr SB Shape -Cylinder Shape le End Cut

E 'ngoe: Carbide Rotary Burr SD Shape -Ball Shape

Ngola molaetsa wa hao mona mme o re romele wona