Carbide Rotary Burr SH Shape -Flame Shape

Tlhaloso e Khutšoanyane:

Carbide Rotary SH Shape Burr e sebelisoa haholo ka lisebelisoa tsa matla a pneumatic kapa lisebelisoa tsa matla, hape e ka kenngoa lisebelisoa tsa mochini, tse sebetsang ho mefuta eohle ea tšepe, jade, lehong, e ka sebelisoa bakeng sa ho sebetsa le ho etsa hlobo le ho etsa lihlahisoa, ho roala mochini. , likhutlo tse pota-potiloeng, ts'ebetso ea li-groove, ho lahla, ho forging, welding, flash, burrs, ho hloekisa litšepe, lisebelisoa tsa tšepe le tse seng tsa tšepe tse kang jade, lejoe, lesapo, lehong joalo-joalo.

Re romelle lengolo-tsoibila

Mehlala ea mahala

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

●100% carbide virgin raw material.
●Maemong a mangata, lebili le lenyenyane le silang le ka nkeloa sebaka ntle le tšilafalo ea lerōle.
● Ho sebetsa ka boleng bo phahameng, ho bentša ka mokhoa o phethahetseng, ho ka sebetsana le likoti tse fapa-fapaneng tsa hlobo tse nepahetseng hantle.
● E bolokehile ebile e loketse ho sebelisoa, e fokotsa matla a basebetsi le ho ntlafatsa tikoloho ea mosebetsi.
● Ho tšoarella hantle, ho u bolokela litšenyehelo tse ngata.

Kopo

1: Ho fokotsa lithapo tsa li-flash, li-burrs le li-welding tsa likarolo tsa ho lahla, ho forging le ho tjheseletsa;
2: Qetella ho etsa mefuta e fapaneng ea liforomo tsa tšepe;
3: Qetella ho seha semathi sa mabili a vane;
4: Chamfering, ho potoloha le ho tsamaisa mefuta e fapaneng ea likarolo tsa mochini;
5: Qetella machining holim'a bokahare bo ka hare ba likarolo tsa mochini;
6: Ho betla ka botaki ba mefuta eohle ea tšepe kapa likarolo tse seng tsa tšepe;

Mefuta ea li-Cutting Edge

Mefuta e meng ea ho khaola	Litšoantšo	Kopo
Single Cut M		Hlooho e le 'ngoe e sehang e le 'ngoe, sebopeho sa serrated se setle, 'me qetello ea bokaholimo e ntle, e loketse ho sebetsana le tšepe e thata ka thata HRC40-60 degrees, alloy e thibelang mocheso, alloy base ea nikel, alloy e thehiloeng ho Cobalt, tšepe e sa hloekang, joalo-joalo.
Habeli Cut X		Sebopeho sena sa ho itšeha habeli se na le chip e khuts'oane le sephetho se phahameng sa holimo, se loketse ho sebetsa tšepe e entsoeng ka tšepe, tšepe e entsoeng ka tšepe, tšepe e thata ho feta HRC60, alloy e thehiloeng ho Nikel, alloy e thehiloeng ho cobalt, tšepe e sa hloekang ea austenitic, alloy ea titanium, joalo-joalo.
Aluminium Cut W		Sebopeho sa ho itšeha sa Aluminium se na le pokotho e kholo ea chip, sehalo se bohale haholo le ho tlosa chip ka potlako, se loketse ho sebetsa aluminium, alloy alloy, tšepe e bobebe, tšepe e seng ferrous, polasetiki, rabara e thata, patsi joalo-joalo.

Lintlha Tse ka Sehloohong

Sebopeho le Mofuta	Odara No.	Boholo				Mofuta oa Leino
Sebopeho le Mofuta	Odara No.	Hlooho Dia (mm) d1	Bolelele ba Hlooho (mm) L2	Shank Dia (mm) d2	Kakaretso ea Bolelele (mm) L1	Mofuta oa Leino
Mofuta oa Flame Shape H	H0307X03-31	3	7	3	38	X
	H0413X03-38	4	13	3	51	X
	H0613X03-38	6	13	3	51	X
	H0618X06-45	6	8	6	63	X
	H0820X06-45	8	20	6	65	X
	H1025X06-45	10	25	6	70	X
	H1232X06-45	12	32	6	77	X
	H1636X06-45	16	36	6	81	X

FAQs

P: A na nka fumana lisampole tsa liteko tsa mahala?
A: E, taelo ea litsela e teng ka mor'a puisano e sebetsang.

Q: Ho thoe'ng ka nako ea pele?
A: Re na le litlhaloso tse tloaelehileng setokong, 'me li ka romelloa matsatsing a mararo ka mor'a ho netefatsa konteraka.

P: Na o ka fana ka lisebelisoa tse ling bakeng sa mochini oa jet oa metsi?
Ee, re na le barekisi ba mochini oa jet ba sebelisaneng ka lilemo tse ngata, re ka u fa lisebelisoa tse ling tsa boleng bo holimo, theko e tlase.

Q: Na fektheri ea hau e ka fana ka tlhahiso ea OEM?
A: E, haeba theko ea hau e lumellana le litlhoko, re ka u etsetsa sephutheloana ho latela litlhoko tsa hau.

Q: Na u netefatsa boleng?
A: E, re na le lits'ebeletso tse netefalitsoeng tsa ho lata lihlahisoa tse rekisitsoeng.Haeba u na le lipotso, ka kopo ikutloe u lokolohile ho ikopanya le basebetsi ba rona ba thekiso.U tla fumana tšebeletso e khotsofatsang ka mor'a thekiso nakong ea lihora tse 24.

E fetileng: Carbide Rotary Burr SG Shape -Sefate sa Sefate se nang le Qetello e Ntlha

E 'ngoe: Carbide Rotary Burr SK Shape -Cone Shape ka 90°

Ngola molaetsa wa hao mona mme o re romele wona