Carbide Rotary Burr SL Shape -Taper Shape e nang le Radius

Carbide Rotary Burr SL Shape -Taper Shape with Radius Featured Image

Tlhaloso e Khutšoanyane:

Carbide Rotary Burr-Taper Shap-Radius SL sebopeho, Carbide burr e sebelisoa haholo bakeng sa ho sebetsa ka tšepe, boenjiniere, boenjiniere ba mohlala, ho betla lehong, ho etsa mabenyane, ho cheselletsa, chamferring, casting, deburring, grind, cylinder head porting and sculpting.E boetse e sebelisoa sebakeng sa sefofane, likoloi, meno, majoe le ho betla tšepe

Re romelle lengolo-tsoibila

Mehlala ea mahala

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

● Ts'ebetso e bonolo, e bolokehile ebile e bonolo.
● E ka ntlafatsa katleho ea mosebetsi le ho fokotsa matla a basebetsi.
● E ka boloka makhetlo a leshome a theko ea tlhahiso le ho eketsa melemo ea moruo.
● Tšebeletso e tšoarellang nako e telele, lebelo la ho sebetsa ka potlako.
●Maemong a mangata, e ka nkela lebili le lenyenyane la ho sila sebaka, ntle le tšilafalo ea lerōle.

Kopo

1: Ho fokotsa lithapo tsa li-flash, li-burrs le li-welding tsa likarolo tsa ho lahla, ho forging le ho tjheseletsa;
2: Qetella ho etsa mefuta e fapaneng ea liforomo tsa tšepe;
3: Qetella ho seha semathi sa mabili a vane;
4: Chamfering, ho potoloha le ho tsamaisa mefuta e fapaneng ea likarolo tsa mochini;
5: Qetella machining holim'a bokahare bo ka hare ba likarolo tsa mochini;
6: Ho betla ka botaki ba mefuta eohle ea tšepe kapa likarolo tse seng tsa tšepe;

Mefuta ea li-Cutting Edges

Mefuta e meng ea ho khaola	Litšoantšo	Kopo
Single Cut M		Hlooho e le 'ngoe e sehang e le 'ngoe, sebopeho sa serrated se setle, 'me sephetho sa bokaholimo se setle, se loketse ho sebetsana le tšepe e thata ka thata HRC40-60 degrees, alloy e hanyetsanang le mocheso, alloy base ea nikel, alloy e thehiloeng ho Cobalt, tšepe e sa hloekang, joalo-joalo.
Habeli Cut X		Sebopeho sena sa ho itšeha habeli se na le chip e khuts'oane le sephetho se phahameng sa bokaholimo, se loketse ho sebetsa tšepe e entsoeng ka tšepe, tšepe e entsoeng ka tšepe, tšepe e thata ka tlase ho HRC60, Nikel based alloy, cobalt based alloy, austenitic stainless steel, titanium alloy, jj.
Aluminium Cut W		Sebopeho sa ho itšeha sa Aluminium se na le pokotho e kholo ea chip, sehalo se bohale haholo le ho tlosa chip ka potlako, se loketse ho sebetsa aluminium, alloy alloy, tšepe e bobebe, tšepe e seng ferrous, polasetiki, rabara e thata, lehong joalo-joalo.

Lintlha Tse Ka sehloohong

Sebopeho le Mofuta	Odara No.	Boholo				Mofuta oa Leino
Sebopeho le Mofuta	Odara No.	Hlooho Dia (mm) d1	Bolelele ba Hlooho (mm) L2	Shank Dia (mm) d2	Kakaretso ea Bolelele (mm) L1	Mofuta oa Leino
Sebopeho sa Taper se nang le Radius Type L	L0313X03-25	3	13	3	38	X
	L0413X03-38	4	13	3	51	X
	L0613X03-38	6	13	3	51	X
	L0616X06-45	6	16	6	61	X
	L0822X06-45	8	22	6	67	X
	L1025X06-45	10	25	6	70	X
	L1228X06-45	12	28	6	73	X
	L1428X06-45	14	28	6	73	X
	L1633X06-45	16	33	6	78	X

FAQs

P: A na nka fumana lisampole tsa liteko tsa mahala?
A: E, tatellano ea litsela e teng ka mor'a puisano e sebetsang.

Q: Ho thoe'ng ka nako ea pele?
A: Re na le litlhaloso tse tloaelehileng setokong, 'me li ka romelloa matsatsing a mararo ka mor'a ho netefatsa konteraka.

P: Na o ka fana ka lisebelisoa tse ling tsa mochini oa jet oa metsi?
Ee, re na le barekisi ba mochini oa jet ba sebelisaneng ka lilemo tse ngata, re ka u fa lisebelisoa tse ling tsa boleng bo holimo, tsa theko e tlase.

Q: Na fektheri ea hau e ka fana ka tlhahiso ea OEM?
A: E, haeba theko ea hau e lumellana le litlhoko, re ka u etsetsa sephutheloana ho latela litlhoko tsa hau.

Q: Na u netefatsa boleng?
A: E, re na le lits'ebeletso tse netefalitsoeng tsa ho lata lihlahisoa tse rekisitsoeng.Haeba u na le lipotso, ka kopo ikutloe u lokolohile ho ikopanya le basebetsi ba rona ba thekiso.U tla fumana litšebeletso tse khotsofatsang ka mor'a thekiso nakong ea lihora tse 24.

E fetileng: Carbide Rotary Burr SK Shape -Cone Shape le 90°

E 'ngoe: Carbide Rotary Burr SM Shape -Cone Shape

Ngola molaetsa wa hao mona mme o re romele wona