330mm Bolelele ba Cemented Carbide Rods Tlhaloso ea Sehlahisoa
Lithupa tsa Carbide tse fatše tse bolelele ba 330mm
lisebelisoa tse kopantsoeng tse entsoeng ka metsoako ea tšepe ea refractory (mohato o thata) le litšepe tse kopanyang (mohato oa bonding) tse hlahisoang ke phofo ea metallurgy.
Thepa e entsoeng ka samente ea carbide e hlahisoang ke k'hamphani ea rona e na le litšobotsi tsa ts'ebetso e tsitsitseng, welding e bonolo, ho hanyetsa ho roala le ho hanyetsa tšusumetso.Thepa e sebelisoa haholo ho seha lisebelisoa, li-endmill, drill, milling cutter.Lithupa tsa carbide li ka sebelisoa bakeng sa ho itšeha, ho hatakela le lisebelisoa tsa ho lekanya,
likotoana tsa ho cheka ka mapolanka, lihahi tsa tšepe tse silang, le libaka tse fapaneng tse sa sebetseng tsa tšepe.
Khamphani ea rona e fana haholo ka h5, h6 tolerance grounded rod carbide le likheo tsa melamu ea carbide
Bolelele bo tloaelehileng ba molamu oa rona o molelele ke 330mm le 310mm.
Lithupa tse khutšoanyane tsa boholo bo fapaneng li ka boela tsa etsoa ho latela litlhoko tsa bareki
* Lisebelisoa tsa rona tse 3 tse loketseng ka ho fetisisa bakeng sa ho etsa mapolanka le ho sebetsa ka tšepe carbide endmill
| Kereiti ya rona | Sehlopha sa ISO | Motsoako oa Lik'hemik'hale | Lintho Tsa 'Mele | Khothaletsa tšebeliso bakeng sa boemo ba mosebetsi | |||||
| WC% | Co% | Ni% | Tse ding % | Ho thatafala | TRS | Botenya | |||
| HRA | Mpa | g/cm³ | |||||||
| ZW05F | K05 | 94 | 5 | / | 1 | 94 | 2800 | 14.9 | Lijo-thollo tse ntle haholo, tse haneloang hantle, li sebetsa ho reamer, sehahi sa khabone le lihahi tsa patsi tsa bamboo |
| ZW30F | K30 | 89 | 10 | / | 1 | 92 | 3800 | 14.4 | Subfine lijo-thollo, etsa kopo ea ho etsa mefuta ea lisebelisoa tsa ho seha lesoba, li-cutters tse silang, likotoana tsa ho cheka, lipompo le li-grater tse potolohang joalo-joalo, hape li sebetsa ho sebetsa tšepe ea carbon, tšepe e batang e batang, alloy e nonferrous, mefuta ea thepa ea polasetiki, fiber ea carbon joalo-joalo, 'me e loketse. lisebelisoa bakeng sa lisebelisoa tse koahetsoeng |
| ZW40F | K40 | 87 | 12 | / | 1 | 92.8 | 4200 | 14.1 | Lijo-thollo tse ntle haholo, sebopeho se setle sa tlhophiso, boima bo phahameng le ho se mamelle, Khothaletso e khethehileng ea ho etsa mefuta ea li-endmill, haholo lisebelisoa tsa ho sila ka lebelo le phahameng, Etsa kopo ea ho etsa li-cutters bakeng sa mefuta e thata ea tšepe, tšepe e sa tsitsang, titanium alloy, die steel (thata ＜60HRC) |
| Mamello ea ISO h6 | Mamello ea ISO h6 | ||
| Diameter(mm) | Bolelele(mm) | Diameter(mm) | Bolelele(mm) |
| 3 | 330 | 23 | 330 |
| 4 | 330 | 24 | 330 |
| 5 | 330 | 25 | 330 |
| 6 | 330 | 26 | 330 |
| 7 | 330 | 27 | 330 |
| 8 | 330 | 28 | 330 |
| 9 | 330 | 29 | 330 |
| 10 | 330 | 30 | 330 |
| 11 | 330 | 31 | 330 |
| 12 | 330 | 32 | 330 |
| 13 | 330 | 33 | 330 |
| 14 | 330 | 34 | 330 |
| 15 | 330 | 35 | 330 |
| 16 | 330 | 36 | 330 |
| 17 | 330 | 37 | 330 |
| 19 | 330 | 38 | 330 |
| 20 | 330 | 39 | 330 |
| 21 | 330 | 40 | 330 |
| 22 | 330 | 42 | 330 |
P: A na nka fumana lisampole tsa liteko tsa mahala?
A: E, tatellano ea litsela e teng ka mor'a puisano e sebetsang.
Q: Ho thoe'ng ka nako ea pele?
A: Re na le litlhaloso tse tloaelehileng setokong, 'me li ka romelloa matsatsing a mararo ka mor'a ho netefatsa konteraka.
P: Na o ka fana ka lisebelisoa tse ling tsa mochini oa jet oa metsi?
Ee, re na le barekisi ba mochini oa jet ba sebelisaneng ka lilemo tse ngata, re ka u fa lisebelisoa tse ling tsa boleng bo holimo, tsa theko e tlase.
Q: Na fektheri ea hau e ka fana ka tlhahiso ea OEM?
A: E, haeba theko ea hau e lumellana le litlhoko, re ka u etsetsa sephutheloana ho latela litlhoko tsa hau.
Q: Na u netefatsa boleng?
A: E, re na le lits'ebeletso tse netefalitsoeng tsa ho lata lihlahisoa tse rekisitsoeng.Haeba u na le lipotso, ka kopo ikutloe u lokolohile ho ikopanya le basebetsi ba rona ba thekiso.U tla fumana litšebeletso tse khotsofatsang ka mor'a thekiso nakong ea lihora tse 24.
